• Counterflow evaporative condensers
  • Induced draft condensers


PC2 evaporative condensers feature easy installation and maintenance and reliability.

Technical specifications
  • G-235 mill galvanised steel used for all units
  • All exposed cut edges are protected with a thick zinc coating applied after fabrication to ensure effective zinc corrosion barrier
  • Serpentine cooling coil built of continuous lengths of all prime surface steel and hot-dip galvanised after fabrication (HDGAF) to avoid zinc corrosion
  • Split coil designed for low pressure drop with sloping tubes for free drainage of fluid and multiple compressors
  • Maximum working pressure: 300 psig
  • High quality mechanical water level control assembly is standard with all units and has been specially designed to provide the most reliable operation while being easy to maintain
  • Standard spray water pump: The patented BAC 360TM non- clog nozzles ensure even flow over the coil area and are simple to remove for maintenance. Parallel flow of air and spray water to allow for inspection and access to the top of the coils during full operation
  • BAC BALTIDRIVE® Power Train engineered drive system consists of a specially designed powerband and two cast aluminum sheaves located at minimal shaft centerline distances to maximise belt life
  • Belt drive systems suitable for variable frequency drive (VFD) applications without requiring expensive optional accessories (compared to a gear drive system)
  • Extended lubrication lines are standard for lubrication of the fan shaft bearings
  • Fittings are located on the exterior casing panel next to the access door
  • The InterLokTM System is a self-aligning casing/basin joint that makes assembly easier and increase the leak resistance of the joint
  • Fan selected to optimise low sound levels and maximise thermal performance
  • Combined Inlet Shields’ (CIS) bent flow path blocks sunlight from the basin and acts as a screen to prevent debris from entering the unit.


  • Combined Inlet Shield (CIS) result in lower maintenance costs and ease of maintenance over the life of the unit
  • System meets wind and seismic requirements of the 2009 International Building Code (IBC) through shake table testing
  • Bearings selected for a minimum life of L10 100 000 hours
  • BAC’s interLokTM system aligns the coil casing and the basin to expedite rigging
  • Single piece lift for most units and containerised units available
  • Footprints that mount on most existing steel supports
  • The BALTIDRIVE® Power Train requires only periodic inspection of components and belt tensioning
  • The BALTIDRIVE® Power Train uses special corrosion resistant materials of construction and state-of-the-art technology to ensure ease of maintenance and reliable year-round performance

  • Industrial applications
  • Replacement or new construction/expansion projects



Related products

Sign up to our Newsletter

Fill in the details below